Product Center
在工業自動控制、汽車、地震測量、軍事和空間系統等領域中的許多場合都是用沖擊加速度傳感器,由于受工作環境的限制,要求沖擊加速度傳感器應具有高的諧振頻率,動態性能要好,以保證快速、準確測試出被測對象的沖擊力或沖擊加速度。
沖擊加速度傳感器,采用MEMS技術與微電子技術成果研制而成,集加速度傳感器、信號變換器、電源變換器、信號濾波電路、飽和控制與溫度補償于一體,具有微體積、微功耗、微噪聲、高集成、高穩定、高可靠、低溫漂、環境適應性強等特點。美國Dytran的3200B是一款I(lǐng)EPE沖擊型加速度傳感器,結構堅固,尺寸小,適用于量程達70000g 以上的沖擊加速度參數測量與控制。
The Dytran 3200B is a highly rugged IEPE accelerometer with a natural frequency greater than 90 kHz, designed to measure severe shocks and other extreme short duration events. High shock measurements are typically characterized as such above the range of 2,500 g's. In order to accurately measure shock levels of this magnitude, accelerometers must have a high natural frequency, rugged construction and be fairly compact in size.
Available with a 70,000g range, Dytran 3200B features a quartz crystal sensing element, operating in compression mode, packaged in a stainless steel housing for a total weight of 6 grams. Units are electrically base isolated and feature a broad frequency response, 1/4-28 mounting stud and 10-32 axial connector.
特性
1. 0.05 mV/g sensitivity
2. 70,000g range
3. 0.35 to 10,000 Hz frequency range (±10%)
4. 10-32 axial connector
5. 1/4-28 mounting stud
6. 6 grams
7. Stainless steel
8. Base isolated
9. Lightweight
10. High natural frequency of >90 kHz
11. IEPE
應用
1. Drop testing
2. Far field blast testing
3. Pyrotechnic testing
4. Shock testing
SPECIFICATION VALUE UNITS
DISCHARGE TIME CONSTANT 1.0 to 1.5 SECOND
LOW FREQUENCY -3db POINT, NOM. .16 Hz
LOW FREQUENCY -5% POINT .50 Hz
FREQUENCY RESPONSE, ±10% .35 to 10000 Hz
LINEARITY [3] ±1 % F.S.
TRANSVERSE SENSITIVITY, MAXIMUM 3.0 %
OUTPUT IMPEDANCE, NOM. 100
OHMS
OUTPUT VOLTAGE BIAS +7.5 to +9.5 VDC
SUPPLY CURRENT RANGE [4] 2 to 20 mA
COMPLIANCE (SUPPLY) VOLTAGE RANGE [4] +18 to +30 VDC
OPERATING TEMPERATURE RANGE -60 to +250 oF
SIZE (HEX x HEIGHT) [5] 3/8 x .64 INCHES
WEIGHT 6 GRAMS
CONNECTOR, TOP MOUNTED 10-32 MICRO-COAXIAL
MATERIAL, HOUSING/CONNECTOR 17-4 PH STAINLESS STEEL
MOUNTING PROVISION, 3200B/3200BT/3200BM 1/4-28/10-32/M6 x 1.0
INTEGRAL STUD
ENVIRONMENTAL SEAL EPOXY
ISOLATION, CASE TO MOUNTING SURFACE (MIN.) 10 GIGOHMS
配件
Recommended Accessories: model 4010C current source power unit
Compatible Cables: 6010A, 6011A, 6012A, 6016A, 6018A, 6022A, 6026A, 6032A, 6033A, 6049A, 6050A, 6051A, 6053A, 6054A, 6066A, 6069A, 6093A, 6099A, 6400A, 6401A, 6412A, 6429A, 6924A, 6930A, 6991A
訂貨型號
MODELS RANGE F.S. MAXIMUM SENSITIVITY ELECTRICAL NATURAL
SHOCK (±10%) [2] NOISE FREQUENCY
(G's) (G's) (mV/G) (G's) (kHz)
3200B +/-70,000 100,000 0.05 1.4 >90
3200B2 +/-50,000 100,000 0.1 0.7 >90
3200B3 +/-20,000 100,000 0.25 0.28 >90
3200B4 +/-10,000 50,000 0.5 0.14 >90
3200B5 +/- 5,000 50,000 1.0 0.07 >90
3200B6 +/- 2,500 50,000 2.0 0.035 >90
3200BT +/-70,000 100,000 0.05 1.4 >90
3200B2T +/-50,000 100,000 0.1 0.7 >90
3200B3T +/-20,000 100,000 0.25 0.28 >90
3200B4T +/-10,000 50,000 0.5 0.14 >90
3200B5T +/- 5,000 50,000 1.0 0.07 >90
3200B6T +/- 2,500 50,000 2.0 0.035 >90
3200BM +/-70,000 100,000 0.05 1.4 >90
3200B2M +/-50,000 100,000 0.1 0.7 >90
3200B3M +/-20,000 100,000 0.25 0.28 >90
3200B4M +/-10,000 50,000 0.5 0.14 >90
3200B5M +/- 5,000 50,000 1.0 0.07 >90
3200B6M +/- 2,500 50,000 2.0 0.035 >90
相關型號
3086A1 70,000 100,000 0.05 1.40 100 45
3086A2 50,000 100,000 0.1 0.7 100 45
3086A3 20,000 100,000 0.25 0.28 100 45
3086A4 10,000 50,000 0.5 0.14 100 45
3086A5 5000 50,000 1.0 0.07 100 45
3086A6 2500 50,000 2.0 0.035 100 45
3086A1T 70,000 100,000 0.05 1.40 100 45
3086A2T 50,000 100,000 0.1 0.7 100 45
3086A3T 20,000 100,000 0.25 0.28 100 45
3086A4T 10,000 50,000 0.5 0.14 100 45
3086A5T 5000 50,000 1.0 0.07 100 45
3086A6T 2500 50,000 2.0 0.035 100 45
產品分類
PRODUCT CLASSIFICATION