Product Center
傳感器信號放大器是將傳感器輸出信號進行精密放大,線路內部進行穩壓、恒流供橋、電壓電流轉換,阻抗適配,線性補償,溫度補償?shù)?,將力學量轉換成標準電流、電壓信號輸出。
美國Transducer Techniques TIO-3000集成放大器和信號調理儀功能,用于信號源和讀出設備之間的信號調理器件,如衰減器、前置放大器、電荷放大器以及對傳感器或放大器進行非線性補償?shù)碾娖睫D(zhuǎn)換器件。
The TIO-3000 System was originally designed to perform precision summing on 2, 3 , or 4 load cell signals for weighing applications. Development has progressed into accessory modules with considerable versatility for user defined configurations in a compact economical five (5) slot system with built-in meter and channel selector.
Please see below for more information on the four available plug in modules and for available system configurations.
詳情請聯系我們
Meter: 3 1/2 or 4 1/2 digit
Sensor Input: 9 pin D connector
Data / Control Output: 25 pin D connector
Size (Inches): 12 wide x 7.5 high x 8 deep
Power: 115 VAC 60 Hz
Fuse: 250 mA
Weight / Force Analog Data
Pressure Current Loops
Strain Peak Capture
Deflection (.5 ms Response Time)
Control (Alarms)
Quick Look Display
Amplifier Type: Bipolar differential
Gain Adjustment: 75 to 1000
Input Impedance: 50 megaohm minimum
Output Voltage: 0 to +-10 volts, less with sum
CMR: 10 dB min., DC to 15 Hz
Noise and Ripple: Less than 10 mV
Nonlinearity: .05% of full scale
Compliance: .1% of full scale
Frequency Response: DC to 16 Hz
Bridge Resistance: 120 to 1000 ohm
Bal Range (350 ohm): 25% of output, minimum
Shunt Calibration: Single point, local
Sensor Wiring: 6 wire shielded
Excitation Type: Constant 8 VDC
up to 100 mA
Load Regulation: .1% max for
訂貨型號
TI0-3000 N/A 5 Chan. Industrial Chassis
TI0-3000-4.5 with 4.5 (19999) Digit Meter
TM0-3 Amp/Conditioner Module
TM0-3A Amp/Cond 4-20MA Module
PKD-3 Peak Hold Module
DSP-3 Dual Setpoint Alarm Module
SUM-3 Precision Sum Module 0-10V
SUM-3A Precision Sum Module 4-20mA
相關型號
DPM-2
LCA-9PC
LCA-RTC
TMO-2
TMO-2A